Liftaway Wastewater Collecting Tank

Grundfos LIFTAWAY  range consists greywater collecting tanks designed to be equipped with Unilift KP or AP12 to get a lifting stations for grey wastewater e.g. from floor drains, wash-basins, washing machines, dishwashers, etc. which cannot be connected directly to the sewer. The tanks are delivered with all installation materials required to mount Grundfos UNILIFT KP and AP pumps with a level switch for automatic start/stop.

LIFTAWAY C

Greywater collecting tank

This 30 liter collecting tank is designed to be equipped with a Unilift KP pump to get a compact lifting station for installation below sewer level.

The tank contains an air vent with charcoal filter and an overflow protection.

The lifting station is only suitable for pumping greywater up to particle sizes of 10mm from e.g. washing machines, showers, wash basins, sink etc..

The system must not be used for the pumping of sewage water from toilets.

The inlet connection is 3 x DN 40 at the sides + 1 x DN 40/50 at the top. The discharge connection is DN 32.

The delivered pipe kit includes non return flap valve and level arm guide to clip on to the pump body for reliable start and stop.

The pump is not part of the delivery of this tank. It must be ordered separately.

Pumps can be chosen from UNILIFT KP range. The pump shall contain a float switch for automatic start and stop (Version A1).

LIFTAWAY B

Greywater collecting tank

This 100 liter collecting tank is designed to be equipped with a Unilift KP or a Unilift AP12.40 pump to get a compact lifting station for underfloor installation in basement floor plate to collect greywater below sewer level from e.g. washing machines, showers, wash basins, bath tubs, sinks and to lift it up to the sewer mains.

The lifting station is only suitable for pumping greywater up to particle sizes of 10mm (KP) or 12mm (AP12) from e.g. washing machines, showers, wash basins, sink etc..

The system must not be used for the pumping of sewage water from toilets.

Prefabricated corrosion-proof polyethylene pit with 3 x DN100 inlet options, DN70 venting and discharge connections R ¼” (KP) or R 1 ½” (AP12.40) and a cable entry.

The tank cover contains a floor drain with a siphon. Both sides of the cover can be used, one side with anti-slip surface and the other is prepared to filled with paving tiles.

The cover is placed on an extension neck to adjust the height to the basement floor.

Note: An additional tank extension is available as accessory.

The delivered pipe kit includes non return flap valve and level arm guide to clip on to the pump body for reliable start and stop.

The pump is not part of the delivery of this tank. It must be ordered separately.

Pumps can be chosen from UNILIFT KP or AP12.40 range. The pump shall contain a float switch for automatic start and stop (Version A1).